The Johnson Hardware 100FD Bifold Closet Door Track and Hardware kit is a commercial or residential grade folding door hardware system designed for use with heavier than normal doors. Patented "tricycle" hangers with large ball bearing wheels, ride smoothly and quietly on convex shaped rails with precision single point contact. Hangers feature a quick disconnect clip system facilitating easy mounting or dismounting of door panels. 14 - 16 gauge zinc dichromate plated steel parts.
Max Panel Size: 24" x 108" x 1-3/4" [610 x 2743 x 44mm]
Max Panel Weight: 75lbs. [34kg] each (Ball Bearing Rollers)
Track Width- 1.787” / Track Height- 1.242”
100FD - Bi-Fold Set can accommodate Doors from 1 1/8” Thick to 1 3/ 4” Thick
JOHNSON HARDWARE'S LIMITED LIFETIME GUARANTEE
Johnson Hardware will replace any item found defective in material or workmanship, regardless of its date of purchase.
Non-Binding Top-Hung Hardware
Allows doors to hang naturally reducing possible warpage problems. Pivot set and door guide are offset (not equal distance from door edge) therefore doors will never bind when in the open position and allow the doors to be pushed shut rather than pulled shut.
Heavy-Duty Pivot Sets
Heavy gauge steel pivot components hold heavy doors securely in place. Top pivot socket holds top pivot firmly in place with a locking clip and will never fall out of the track. Bottom pivot carries no weight and is completely adjustable for precision door alignment.
Heavy walled aluminum track is precision extruded for smooth operation. Box design means that doors will never jump track. Convex track rails reduce roller friction. Features Johnson's line-design fascia to hide finger marks and scratches, or to hold paint if desired.
Ball Bearing Roller Guide
Heavy-duty tricycle hangers distribute weight equally and support heavy solid core door panels. Nylon encapsulated ball bearing wheel design for smooth, feather touch operation. Hanger plate detaches from hanger trolley for easy door installation or removal. Hangers are adjustable for height in case of settling.
Specially designed 2-piece non-mortise hinge enables door panels to be installed or removed by simply lifting off. Nylon bearing surfaces provide long wearing and smooth operation.
Hardwood Track Valance Installation Instructions
3/8” x 1 1/2” wide
Simply glue onto ridged front surface of track, with construction adhesive, and clamp wood to it until dry. Silicone type compounds can also be used. Make sure that no adhesive gets onto front surface of wood. If adhesive gets onto front surface , remove immediately. After drying, finish wood as wanted, whether by painting or staining.
This product was added to our catalog on Wednesday 04 March, 2009.