1-800-772-0314 | 8-4 PM, M-F, EST
72 In. Track for (4) 18 In. Panels
APPLICATION: INTERIOR, RESIDENTIAL/COMMERCIAL
PANEL THICKNESS: 1-3/8" [35mm]
MAX WEIGHT: 75lbs. [34kg] PER PANEL
Track Width- 1.787” / Track Height- 1.242”
100FS - Bi-Fold Side-Mount
1 3/8” can accommodate Doors from 1 1/8” Thick to 1 3/ 8” Thick
1 3/4” can accommodate Doors from 1 1/8” Thick to 1 3/ 4” Thick
The 100FS is commercial grade side mounted bi-folding door hardware designed to carry heavy solid core folding door panels made from plywood, particle board, flake board, or other materials not suited for use with top mount hangers. Pivots and guides are mounted to the backside of the door panels.
SIDE MOUNT PIVOTS AND GUIDES
Side mount Top Pivot Plates and Top Panel Guide Plates allow hardware to be mounted to door material not suited to edge mounting such as MDF, particle board or Plywood for example.
Top-Hung hardware allow doors to hang naturally reducing possible warpage problems. Top pivot socket holds top pivot firmly in place with a locking clip and will not fall out of the track. Bottom pivot carries no weight and is completely adjustable for precise door alignment.
Pivot set and door guide are offset (not equal distance from door edge) therefore doors will not bind when in the open position and allow the doors to be pushed shut rather than pulled shut.
Heavy gauge steel pivot components hold heavy doors securely in place and ensure a long operating life.
Heavy-duty panel hangers feature a tricycle design to support heavy solid core door panels and distribute weight evenly. Nylon encapsulated ball bearing wheel design provides smooth, silent feather touch panel operation. Hanger plate detaches from hanger trolley for easy door installation or removal. Hangers are adjustable for height in case of settling.
Heavy walled aluminum track is precision extruded for smooth operation. Box design means that doors will not jump track. Convex track rails reduce roller friction. Features Johnson's line-design fascia to hide finger marks and scratches, or to hold paint if desired.
Specially designed 2-piece hinge enables door panels to be installed or removed by simply lifting off. Nylon bearing surfaces provide long wearing and smooth operation. Non-mortise design allows for easy hinge installation and correct panel spacing.
3/8” x 1 1/2” wide
Simply glue onto ridged front surface of track, with construction adhesive, and clamp wood to it until dry. Silicone type compounds can also be used. Make sure that no adhesive gets onto front surface of wood. If adhesive gets onto front surface , remove immediately. After drying, finish wood as wanted, whether by painting or staining.
This product was added to our catalog on Thursday 07 November, 2013.
Have questions? Hartford Building Products Call us at 800-772-0314 We're here 8-4, M-F EST. We're here to help.
Many items are in stock and ready to ship